
The PQ-1212-00 is TUSQ 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass.
Measure | Length | Width |
Height |
E to E |
inches |
1.770" |
0.196" |
0.358" | 1.377" |
inches | 1 6/8" |
3/16" | 11/32" | 1 12/32" |
millimeters | 41.00mm | 5.00mm | 9.10mm |
35.00mm |
Note: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper.
TUSQ delivers a rich tone, crystal clear bell like high end with big open lows and a significant increase in harmonic content and harmonic sustain. Increase harmonics equals more richness and character in your tone. Its the difference between a four piece choir and a twelve piece choir singing every time your play a note.
![]() |
Consistent quality | ![]() |
Increased harmonic content |
![]() |
Ivory white in color |
![]() |
|||
1. Measure the overall length of your existing nut. Be as accurate as you can by using a ruler, calipers or a tape measure. Record this dimension. | 2. Measure the overall width of your existing nut. Be as accurate as you can by using a ruler, calipers or a tape measure. Record this dimension. | 3. Measure the E to E spacing of your existing nut, from the center of the low E slot to the center of the high E slot. Be as accurate as you can by using a ruler, calipers or a tape measure. Record this dimension. | 4. Measure the overall height of your existing nut from the bottom to the highest point.Be as accurate as you can by using a ruler, calipers or a tape measure. Record this dimension. |